Cart
0
Product
Products
(empty)
No products
To be determined
Shipping
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total shipping
To be determined
Total
Sale!
View larger
View larger
ASTM A106/A106M
New product
ASTM A106/A106M 2015 Edition, November 1, 2015 Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
More info
Description / Abstract:
This specification2
covers seamless carbon steel pipe for high-temperature service
(Note 1) in NPS 1⁄8 to NPS 48 [DN 6 to DN 1200] (Note 2) inclusive,
with nominal (average) wall thickness as given in ASME B 36.10M. It
shall be permissible to furnish pipe having other dimensions
provided such pipe complies with all other requirements of this
specification. Pipe ordered under this specification shall be
suitable for bending, flanging, and similar forming operations, and
for welding. When the steel is to be welded, it is presupposed that
a welding procedure suitable to the grade of steel and intended use
or service will be utilized. NOTE 1—It is suggested, consideration
be given to possible graphitization.
NOTE 2—The dimensionless designator NPS (nominal pipe size) [DN (diameter nominal)] has been substituted in this standard for such traditional terms as “nominal diameter,” “size,” and “nominal size.”
Supplementary requirements of an optional nature are provided for seamless pipe intended for use in applications where a superior grade of pipe is required. These supplementary requirements call for additional tests to be made and when desired shall be so stated in the order.
The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
The following precautionary caveat pertains only to the test method portion, Sections 11, 12, and 13 of this specification:This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2 For ASME Boiler and Pressure Vessel Code applications see related Specifications SA-106 in Section II of that Code.
*A Summary of Changes section appears at the end of this standard
NOTE 2—The dimensionless designator NPS (nominal pipe size) [DN (diameter nominal)] has been substituted in this standard for such traditional terms as “nominal diameter,” “size,” and “nominal size.”
Supplementary requirements of an optional nature are provided for seamless pipe intended for use in applications where a superior grade of pipe is required. These supplementary requirements call for additional tests to be made and when desired shall be so stated in the order.
The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
The following precautionary caveat pertains only to the test method portion, Sections 11, 12, and 13 of this specification:This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2 For ASME Boiler and Pressure Vessel Code applications see related Specifications SA-106 in Section II of that Code.
*A Summary of Changes section appears at the end of this standard