No products
SAE There are 9383 products.
-
SAE ARP 1947C:2018-08-22
SAE ARP 1947C:2018-08-22 Dendrite Arm Spacing of Structural Aircraft Quality D357 Aluminum Allow Castings, Determination and Acceptance of
$31.50 $75.00 -58%In Stock -
SAE AMS 4918P:2018-08-22
SAE AMS 4918P:2018-08-22 Titanium Alloy, Sheet, Strip, and Plate 6Al - 6V - 2Sn Annealed
$31.50 $75.00 -58%In Stock -
SAE AMS 7322G:2018-08-22
SAE AMS 7322G:2018-08-22 Rings, Sealing, Cast Tin Bronze 80Cu - 19Sn As Cast
$31.50 $75.00 -58%In Stock -
SAE ARP 6318:2018-08-20
SAE ARP 6318:2018-08-20 Verification of Discrete and Packaged Photonic Device Technology Readiness
$31.50 $75.00 -58%In Stock -
SAE J 1939:2018-08-20
SAE J 1939:2018-08-20 Serial Control and Communications Heavy Duty Vehicle Network - Top Level Document
$31.50 $75.00 -58%In Stock -
SAE AS 27640D:2018-08-20
SAE AS 27640D:2018-08-20 BEARING, BALL, AIRFRAME, ANTI-FRICTION, HEAVY DUTY
$31.50 $75.00 -58%In Stock -
SAE AS 27646D:2018-08-20
SAE AS 27646D:2018-08-20 BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA LIGHT DUTY
$31.50 $75.00 -58%In Stock -
SAE AMS 5903C:2018-08-17
SAE AMS 5903C:2018-08-17 Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (302) Cold Rolled, 1/4 Hard, 125 ksi (862 MPa) Tensile Strength
$31.50 $75.00 -58%In Stock -
SAE AMS 5904C:2018-08-17
SAE AMS 5904C:2018-08-17 Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (302) Cold Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength
$31.50 $75.00 -58%In Stock -
SAE AMS 5617K:2018-08-17
SAE AMS 5617K:2018-08-17 Steel, Corrosion-Resistant, Bars, Wire, and Forgings 12Cr - 8.5Ni - 1.2Ti - 2.0Cu Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable
$31.50 $75.00 -58%In Stock -
SAE AMS 5670G:2018-08-17
SAE AMS 5670G:2018-08-17 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe 1800 °F (982 °C) Solution Heat Treated, Precipitation-Hardenable
$31.50 $75.00 -58%In Stock -
SAE AMS 5661G:2018-08-17
SAE AMS 5661G:2018-08-17 Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 42.5Ni - 12.5Cr - 5.8Mo - 2.9Ti - 0.015B - 35Fe Consumable Electrode or Vacuum Induction Melted Solution, Stabilization, and Precipitation Heat Treated
$31.50 $75.00 -58%In Stock
